KelTek PF9 Trigger MOD

Discussion in 'General Firearm Forum' started by agalindo, Jan 24, 2014.

  1. agalindo

    agalindo New Member

    [FONT=&quot]OK I really like my PF9 but the trigger is kind of thin and pointy causing it to pinch and it's also set too far forward for a comfortable pull.

    Here's how I did it.

    Drill and tap the trigger in the area that is closest to the trigger/frame. I then adjusted the screw until it would reset after firing but also remove the most pretravel. Marked the screw with a file and removed it. I then put blue loctite and re-inserted the screw. I also removed a bit off the trigger and rounded the sharp edges.

    If you need detailed instruction let me know.